Jual Fuel Transfer Pump FR-2272 Merk Flo rite

Jual Flowmeter minyak Flo-rite

Spesifikasi:

flowmeter Merk:  flo-rite

Tipe: series 888L.
diameter 1″ NPT
flow rate 19-76 lpm
pressure 50psi
temperatur 60c

FLO-RITE Flow meter size 1 inchi tipe 888 l
FLO-RITE Flow meter size 1 inchi tipe 888 l
FLO-RITE Flow meter size 1 inchi tipe 888 l
FLO-RITE Flow meter size 1 inchi tipe 888 l
FLO-RITE Flow meter size 1 inchi tipe 888 l
FLO-RITE Flow meter size 1 inchi tipe 888 l

Eutech DO 6+| Jual DO Meter merk eutech|cv.Bunga Toba

Product Specification

Dissolved Oxygen Range 0 to 20.00 mg/l or ppm
Resolution & Accuracy 0.01 mg/l or 0.01 ppm & ±1.5% Full Scale
% Saturation of Oxygen 0.0 to 200/0 %
Resolution & Accuracy 0.1% & ±1.5% Full Scale
Temperature Range 0.0 to 50.0 °C (32 to 122 °F)
Resolution & Accuracy 0.1 °C (0.1 °F) & ± 0.3 °C (0.5 °F)
Salinity Correction 0.0 to 50.0 ppt
Barometric Pressure Correction 500 to 1499 mmHg or 66.6 to 199.9 kPA
Method Automatic correction after manual input
No. of Calibration Points Up to 2 points; 100% in air and/or
0% in known solution
Special Functions Self-diagnostic; Electrode characteristics;
Hold & Auto-Power Off after20 minutes
Power Requirements 4 x 1.4V batteries; > 700 hrs

Jual Denso – Denso S105 Paste 2,5 kg ( 5,5 lbs )

Denso Paste S105 is a soft petrolatum primer containing water
displacing corrosion inhibiting and fl ow control additives. The primer can be applied by gloved hand or stiff bristle brush.

Used.

Denso Paste S105 serves as a corrosion inhibitor and aids in the application of petrolatum tapes.
It is very effective underwater or on very wet metal surfaces such as pilings, risers, and H-piles.

Feature

Applied to marginally prepared surfaces (SSPC SP 2-3)
Applied to very wet or underwater surfaces
Contains no V.O.C.’s • Can be applied by inexperienced personnel
No shut downs necessary
No cure time
Meets AWWA C-217
Application

Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning”
or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 – 7,000 psi (20.68 – 48.26 MPa)
is also suitable. Apply a thin uniform coat of Denso Paste S105 to entire surface with gloved hand, brush or rag