LTC Glodok Jl. Hayam Wuruk No 127 Jakarta Barat
LT 2 Blok C9 No.8
: 081388372016, 0813-1151-8884
Call for Price
In StockSpecifikasi:
Merk : MACNAUGHT
Type: FO25-1S3
Flow Range : 6-120 LPM
Max Press : 3500 kPa
Temperatur Max : 80 Derajat
Port Size: 1 Inch NPT
flow meter macnaught fo251s3

Oil flow meter macnaught fo251s3
Specifikasi:
Merk : MACNAUGHT
Type: FO25-1S3
Flow Range : 6-120 LPM
Max Press : 3500 kPa
Temperatur Max : 80 Derajat
Port Size: 1 Inch NPT
Meteran minyak solar, OGM 1 inch Merk Metflo
Flow meter Flo rite
AC Fuel Transfer Pump
Model: FR 2260 ac/k
Flow rite : 15 lpm/60 GPM
Voltage: 230 v/ 50 hz
Duty Cycle : 30 Min
Flow meter : 800 L
Model Pump: FR 2272
Nozzle: Manual
Selang Hisap Transparan: 2 mETER
sELANG bUANG: 4 Meter
Size: 1 Inchi
Tipe: FGBB835BDL-04X
Size: DN 25 mm/ 1 Inchi
Spesifikasi :
| Measurable Fluids |
Gasoline, Kerosene,Light
Oil,Heavy Oil, Solvent
& Crude Oil
|
| Accuracy | ±0.5% |
|
Flow Range
Kerosene, Light Oil
|
150 ~ 3,000 l/h |
|
Flow Range
Heavy Oil
|
50 ~ 3,000 l/h |
|
Max. Operating
Pressure
|
10 Kgf/cm² |
| Hydraulic Test Pressure | 20 Kgf/cm² |
|
Max. Temperature
Heavy Oil
|
80oC |
| Flange Rating | JIS 10 Kgf/cm² |
| Counter Unit |
Integrating Pointer and
Integrating Counter
|
| Body Material | Cast Iron |
Series 800C Meter
Accurate reading
Precision at +- 1%
Readout: 6 digit(total)
Specification:
Max. Working Pressure: 3.5 Bar/ 50 Psi
Flow Rate : 19-76 L/min = 5-20 GPM
Precision : +- 1 %
Inlet & Outlet : 1 ” NPT
LTC Glodok Jl. Hayam Wuruk No 127 Jakarta Barat
LT 2 Blok C9 No.8
: 081388372016, 0813-1151-8884
Flowmeter Merk: Oval Flowpet
Tipe: LS 5276
Size: 25 mm/ 1 Inch
Press: Jis 10 Kg/cm2
Temperatur Maximum: 120*C
Kero: 300-2000 l/h
L.o : 150 -2000 l/h
FO : 80-2000 l/h
Denso Paste S105 is a soft petrolatum primer containing water
displacing corrosion inhibiting and fl ow control additives. The primer can be applied by gloved hand or stiff bristle brush.
Used.
Denso Paste S105 serves as a corrosion inhibitor and aids in the application of petrolatum tapes.
It is very effective underwater or on very wet metal surfaces such as pilings, risers, and H-piles.
Feature
Applied to marginally prepared surfaces (SSPC SP 2-3)
Applied to very wet or underwater surfaces
Contains no V.O.C.’s • Can be applied by inexperienced personnel
No shut downs necessary
No cure time
Meets AWWA C-217
Application
Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning”
or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 – 7,000 psi (20.68 – 48.26 MPa)
is also suitable. Apply a thin uniform coat of Denso Paste S105 to entire surface with gloved hand, brush or rag
