Description

flo rite flow meter 1 inch series 888 meter

Flow meter flo rite 1 inchi line of mechanical flow
meters are designed to meet the stringent demands of customers who
need to monitor fuel usage accurately and dependably. Rugged construction,

flo rite flow meter 1 inch series 888 meter

• Gasoline, Diesel, B20, E15, and Kerosene
Compatible
• Large 3 digit display on 800 series meters
and 4 digit display on 900 series meters.
• UL/cUL, CE, Ex Certifications
• +/- 1% accuracy on all 800 series meters,
and +/- 2% accuracy on all 900 series
meters.

To ensure safe and efficient operation, it is essential to read
each of these warnings and precautions, and to follow all
instructions listed in this manual.
1. Improper use or installation of this product can cause
serious bodily injury or death.
2. DO NOT smoke near meter or use meter near an open flame
when dispensing flammable fluids. Fire could result.
3. Do not exceed 50 PSI / 3.5 BARS line pressure.
4. CAUTION: Do not install additional foot valve or check valve
during installation without pressure relief valve. Cracking
may result.
5. This product should not be used for fluid transfer into aircraft.
6. This product is not suited for use with fluids for human
consumption, includi

MAINTENANCE
Meter should operate maintenance free. However, certain
liquids can dry out while in the meter housing, causing the
meter to stop. If this happens, meter should be thoroughly
cleaned (see instructions below).
Cleaning Instructions:
Run a flushing fluid through meter. For a more thorough
cleaning, disassemble meter per “ASSEMBLY /
DISASSEMBLY” section, “Meter Chamber Assembly”
subsection. Rinse all meter components. Recalibrate meter
following calibration instructions above.
Storage:
If meter is to be stored for a period of time, clean thoroughly. This
will help protect meter from damage

Link Kami lainnya: Flo-Rite flow meters series 888 L SIZE 1 Inchi