LTC Glodok Jl. Hayam Wuruk No 127 Jakarta Barat
LT 2 Blok C9 No.8
: 081388372016, 0813-1151-8884
No products in the cart.
Call for Price
In StockFlow meter Fill Rite
Tipe: series 900 c
Description: 4 Digit
Flow Rate (GPM/LPM) : 6-40 / 23-151
mAX pRESURE ( psi/bar) : 50/ 35
inlet/ outlet : 1,5 inchi
compatible Fluid: Gasoline, Disel, B2O,e15,kerosen
Fill Rite Flow meter series 900
Alat pengukur minyak Fill Rite series 900 c
Specifikasi:
Merk : Fill Rite
Type : Series 900 C
Ukuran : 1,5 Inchi Drat NPT
Presure : 50 psi Maximum
4 Digit reset Total
Total Liter : 8 Digit
Flow Rate : 40-60 GPM/23-151lpm
2-20 GPM Flow
Pressures to 125 psi max
Glass-filled polypropylene housing
Fluorocarbon seals
1 in. FNPT ports
-10°F-130°F temperature range
360° positioning display
Quick, one step calibration
Waterproof, corrosion resistant
20 stored calibration factor settings
Two alkaline AA batteries included
Spesifikasi:
Flow meter Merk: Macnaught
Tipe: F040- 3S4
Size: 1,5 Inch / DN 40 mm
Max Temperatur: 80 DERAJAT cELSIUS
Flow range: 10-450 LPM
Max Presure: 1800 kpa
Flowmeter Merk: Oval Flowpet
Tipe: LS 5276
Size: 25 mm/ 1 Inch
Press: Jis 10 Kg/cm2
Temperatur Maximum: 120*C
Kero: 300-2000 l/h
L.o : 150 -2000 l/h
FO : 80-2000 l/h
LTC Glodok Jl. Hayam Wuruk No 127 Jakarta Barat
LT 2 Blok C9 No.8
: 081388372016, 0813-1151-8884
Denso Paste S105 is a soft petrolatum primer containing water
displacing corrosion inhibiting and fl ow control additives. The primer can be applied by gloved hand or stiff bristle brush.
Used.
Denso Paste S105 serves as a corrosion inhibitor and aids in the application of petrolatum tapes.
It is very effective underwater or on very wet metal surfaces such as pilings, risers, and H-piles.
Feature
Applied to marginally prepared surfaces (SSPC SP 2-3)
Applied to very wet or underwater surfaces
Contains no V.O.C.’s • Can be applied by inexperienced personnel
No shut downs necessary
No cure time
Meets AWWA C-217
Application
Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning”
or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 – 7,000 psi (20.68 – 48.26 MPa)
is also suitable. Apply a thin uniform coat of Denso Paste S105 to entire surface with gloved hand, brush or rag
Flow meter Fill Rite
Tipe: series 900 c
Description: 4 Digit
Flow Rate (GPM/LPM) : 6-40 / 23-151
mAX pRESURE ( psi/bar) : 50/ 35
inlet/ outlet : 1,5 inchi
compatible Fluid: Gasoline, Disel, B2O,e15,kerosen